- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Cube Lights
- 11-Gauge US Steel Construction
- Retain OEM Receiver Hitch And Wiring
- Pre-Cut Openings To Utilize Factory Sensors
- 100 Pct. Made In The USA
- Ambush Series Rear Bumper
- Smitty Bilt Apollo JL/JT Rear Bumper
- Atlas Rear Bumper
- Frame Cap Style Bumper
- Provide The Best Obstacle Clearance And Departure Angle
- Grade-8 Hardware For Easy Installation
- The Best Ground Clearance And Departure Angle
- Angled Facets To Improve Its Ability To Slide Over The Rocks
- Installation Requires Cutting / Trimming
- A Laser-Cut Steel Template Is Provided
- Includes High Clearance Recovery Shackle Tabs
- Integrates The Existing Receiver Hitch
- Back Up Lights
- Back Up Sensor Holes
- Retains Receiver Hitch And Wiring Locations
- Pipe And Formed Treadplate
- Gloss Black Powder Coat
- Combination Pipe And Tread Plate Construction
- Gloss Black Powder Coat
- Back Up Lights Included
- Pre-Drilled Sensor Holes
- Retains OEM Receiver Hitch And Wiring Locations
- MADE IN THE USA
- Blind Spot Mounts
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Cube Lights
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Two Cube Lights
- Provides The Highest Ground And Tire Clearance Possible
- Protects The Flares From Trail Hazards
- Full Width
- Integrated Hitch Receiver
- Recovery Shackle Tabs
- Frame Mounted For Strength Without Stress To Body/Bumper
- Single-Action Opens And Closes w/Jeeps Tailgate
- Compatible w/Crawler™ And Bruiser™ Series Rear Bumpers
- Concealed Heavy Duty Pivot w/Tapered Roller Bearings
- SpyderShell™ Armor Coat Finish w/5-Year Warranty
- Stainless Steel
- Weather Resistant
- Pair
- Hardware Included
- Limited 5 Year Warranty
- Black
- OE Style
- Direct Fit
- Limited 5 Year Warranty
- Classic Rock Crawling Rear Bumper
- Low-Profile Desert Racing Design
- Two Light Mounts that Fit 3 In. Light Pods
- Fits up to a 37 In. Spare Tire
- Tube And Plate Steel Construction
- Paintable Aluminum Accent Panels
- Retains Full Functionality Of Oem Backup Sensors
- Accommodates Factory Tow Hitch
- Bolt-On Installation
- Crawler Rear Bumper
- 100 Percent Made In Texas USA
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Has Recessed Light Pods For 2X Rigid SRM Backup Lights
- Has Recessed Light Pods For QuakeLED QQU451
- Special Order Options Include Tire Carrier /Corner Guard Upgrades
- Tubular w/Sheet Metal Design
- Keeps Bumper Weight To a Minimum
- Provides Superior Strength Over OEM Rear Bumper
- Tall Corners Keep The Lines Of The Vehicle
- Built In Step Pockets For Easy Bed Access
- OE Sensor Compatible
- Flat Black Powder Coat
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Bumper Meets Rear Flares To Create Convenient Step
- Available With Or Without A Tire Carrier
- Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
- Rear Parking Blind Spot Sensor Compatible
- Maintains Factory Receiver
- Provision To Relocate Backup Camera
- Made In The USA
- Paintable
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Bumper Meets Rear Flares To Create Convenient Step
- Available With Or Without A Tire Carrier
- Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
- Rear Parking Blind Spot Sensor Compatible
- Maintains Factory Receiver
- Provision To Relocate Backup Camera
- Made In The USA
- Made In America And Proudly Built In Texas
- 7-Gauge Steel
- .25 in. Mounting Brackets And Internal Bracketry
- Direct Bolt-On Design
- Sensor Compatible
- Integrated 8 in. Accent LED Light
- 3 in. Cube Light Mounts
- Corner Step
- Integrated Blind Spot
- Bolt-On Steel Step Plates
- Textured Satin Black Powder Coat
- Lifetime Structural Warranty
- Higher Than Factory Ground Clearance
- 3.5 mm Steel Plates w/ 5 mm. Steel Supports
- Micro-Texture Black Powder Caot Finish
- Dual Clevis Mounts for 3/4 in. D-Ring Shackels
- Retains Factory Backup Sensors
- Integrated Steps On Either Side Of The Tailgate
- Durable Formed 3/16in. Steel Construction
- Retain OEM Receiver Hitch And Wiring Locations
- 3/4in. D-Ring Recovery Points
- 2 Stage Black Powder Coat
- Satin Black Finish
- Massive Recovery Hooks
- Built-In Jack Lifting Points
- Limited 5 Year Warranty
- 3/16 in. Internal Structure Plating
- 1/8 in. External Steel Plating
- Reinforced Clevis Mounts
- Dimple Died Step Plates
- Identity Jeep Rear Bumper
- iDentity Bumper Components
- Truly Modular Design For Customization
- Optional Shackle Or Non-Shackle Mount End Pods Available
- Avail. Mesh And Trim Ring Inserts w/Integrated Parking Sensors
- Integrated 8 in. Accent Led Lighting w/Preparatory Control Module
- Accommodates w/Factory Hitch And Tow Point
- Allows For Multitude Of Rear Facing Light Options
- Constructed From High Quality Steel
- Made In USA
- Identity Rear Bumper Shackle End Pods
- Designed To Absorb Rear Impacts Up To 5Mph
- Ideal For Delivery Vans And Cargo Vans
- Integrated 9-1/2in. Wide Stepping Surface
- Fleet-Approved Expanded Metal Treads For Maximum Traction
- Reinforced Heavy-Wall Steel Tube Construction
- Dual A-Coat w/Gloss Black Powder Coat Finish
- Designed To Accept Parking Sensors
- Assembled In USA
- Designed To Absorb Rear Impacts Up To 5Mph
- Ideal For Delivery Vans And Cargo Vans
- Spring-Loaded Shock-Absorbers Built Into The Mounting Brackets
- Integrated 9-1/2 in. Wide Stepping Surface
- Fleet-Approved Expanded Steel Treads For Maximum Traction
- Reinforced Heavy-Wall Steel Tube Construction
- Universal Design With Vehicle-Specific Shock Assembly
- Made In Usa May Include Imported Hardware
- Direct Fit
- Manufactured From 3/16 and 1/4 Cold Roll Steel
- Solid Mount D-Rings Welded On The Inside And Out
- Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
- Smittybilt Advantage Warranty
- M1A2 Modular Rear Bumper For 14-18 Chevy Silverado
- 2 Clevis Mounts That Take 3/4 In. D-Rings
- Includes Paintable Aluminum Inserts
- Utility Steps Located On Each Corner For Easier Bed Access
- Parking Sensors Are Retained
- Gusseted Construction For Strength
- Direct Fit Bolt-On Installation
- OEM Style Steel Rear Bumper
- Hammer Black Powder Coat Finish
- 10 In. Single Row Light Bar Mounts
- Parking Sensor Cutouts
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Backup Sensor Cutouts
- Mounts For Cube Lights
- Backup Sensor Cutouts
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Cube Lights
- Rear Bumper
- 3/16 Inch Steel Plate Construction
- Bolt On Installation Includes Hardware
- Dual Shackle Plates For D-Rings Tie To Frame Rails
- License Plate Pocket Reuse OEM Lights
- Dual Process Black Powder Coat Finish
- Retain OEM Tow Hitch
- Can Mount TN-5293 Swing Arm Tire Carrier
- 3/16 in. Cold Rolled Steel Plate Construction
- Dual Shackle Plates Tie To Frame Brackets
- Will Allow For TC 5293 Swing Arm
- Stronger Then OEM Bumper
- Dual Process Black Powder Coat Finish
- Easy At Home Installation With Only Hand Tools
- Return OEM Tow Hitch
- Our Rear Bumpers Come With 7/8 in. D-Ring Shackles
- Will Work w/Your Factory Hitch Receiver
- Lights Not Included
- Aggressive Styling
- Integrated Tow Hooks And D-Ring Mounts
- Double Rung Side Step
- Fab Fours Signature Knife Edge Design
- Ease Of Installation
- Includes 16 Gauge Removable Skin
- Sensor Compatible
- 2 Integrated Pod Mounts For Reverse Lights
- Stainless Steel Hardware
- 2 Stage Matte Black Powder Coat
- 11 Gauge Steel Construction
- MADE IN THE USA
- Direct Fit
- 2 And 4-Door Models
- Textured Black
- One-Piece Design
- Robotically Welded For Extreme Durability
- Pre-Cut Vertical Uprights For A Signature Look
- No Hitch
- 5 Year Limited Warranty
- OE Style
- Direct Fit
- Limited 5 Year Warranty
- Rear Bumper Light With Fog Light
- Rear Bumper Step Pad
- Slim Design
- Textured 3 Stage Powdercoat
- Solid Steel Construction
- Light Weight
- Bolt On Installation
- Standard Dv8 Warranty
- Aluminum Vents Can Be Color Keyed To The Jeep
- Rear Steel Bumper
- Gloss Black
- Allows Oversized Spare Tire
- Welded End Caps
- Limited 5 Year Warranty
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- Hammer Black Powder Coat Finish
- Parking Sensor Cutouts
- Maximize Performance On The Toughest Trails
- Multi-Faceted Bumper Design
- Plate Steel Bumper Construction
- Recessed Back-Up Lamps
- Integrated Hitch Receiver
- Rock Solid Mounting
- Recovery Shackle Tabs
- Multi-Faceted Design
- Recessed Back-Up Lamps
- Works w/Existing Equipment
- Rock Solid Mounting
- Black
- Stamped Steel
- Fits Up To 7/8 in. D-Rings; Not Included
- Efficient Stamping Process Used
- Creates A Product Lighter Than Most Aftermarket Steel Bumpers
- Sturdy 11 Gauge Powder Coated Steel Construction
- 11-Gauge Main Body
- 7-Gauge Bracketry
- Louvered Recesses For Reduced Drag
- Sensor Compatible
- Direct Bolt On Application
- Block Off Plate w/Stainless Hardware For No Lighting Option
- High Clearance Bumper
- Formed To Fit The Contours Of Vehicle
- CNC Laser Cut
- Made In America
- Spartan Rear Bumper
- Full Width Bumper
- Stain Black Finish
- Center Bumper
- Works w/Factory JK Tow Hitch
- 6 Year Limited Warranty
- Raised corners for better entry and exit under the most extreme conditions
- Accommodates 3X3 Cube Led Lights
- Integrated 3/4 in. D-Ring Mounts
- Class Iii Receiver Hitch
- Integrated Jack Points
- Perfect Mid Width Design
- Direct Fit
- Two Stage Textured Black Powder Coat Finish
- Dense Zinc Treated Undercoating
- Expertly Robotically Welded
- Bumpers
- New solid D-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
- Aux back up light cut out provided
- 3/16-inch cold rolled steel with two-stage textured matte black finish
- Powder coat finish 5 year limited warranty
- Smittybilt limited lifetime warranty
- Modular design; tire carrier can be added in the future.
- Class III hitch for true towing with towable d-ring
- Direct Fit
- Black Powder Coat
- Dense Zinc Treated Undercoating
- Two Stage Textured Black Powder Coat Finish
- Expertly Robotically Welded
- Bumpers Bolt Directly To Your Vehicle
- Bumper Is 2 in. X .120 in. Wall
- 2 in. Receiver Rated Class III 9;000 LBS.
- Standard Rear Bumper
- Backup Sensor Cutouts
- Hammer Black Powder Coat finish With Satin Black Panels
- Mounts For Cube Lights
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Two Cube Lights
- Retains OEM Parking Sensors
- Retains OEM Tow Hitch And Trailer Plug
- Retains OEM Blind Spot Modules
- Made In Texas USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In American And Texas Strong USA
- 3/16 in. Heavy Duty Steel Construction
- 1/4 in. Gusseting And Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
- Includes License Plate Lights
- Light Ports For Led Backup Lights
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Not Vehicle Specific
- 3mm Deep Drawn Formed Steel
- Winch Compatible Up To 12K
- Includes Modular Wings With Light Provisions
- Integrated D-Ring and Lift Points
- Oe Fog Light Provision
- Integrated Overrider With 13 in. Lightbar Provision
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- Strong/ Lightweight And Rust-Free Hardened Aluminum Construction
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Center Section PN 2081001/ Corners PN 2081200
- Includes Brush Guard PN 2081205 And Mounting Hardware
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Rear Center Section Only
- LEDs Feature Waterproof Aluminum Housing And 50000-Hour Lifespan
- Flood Beam Pattern w/2200-Lumen Output Each
- Cutouts And Mounting Tabs Allow For OE Lights
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Center Cutout For Trailer Hitch Receiver Tube
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Rear Center Section PN 2081020
- Includes Corners PN 2081222 And Mounting Hardware
- Shackle Rating Of 12500 lbs. For Off-Road Purpose
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Center Cutout For Rear Mount Trailer Hitch Receiver Tube
- Includes Mounting Hardware And 3/8 in. Thick Brackets
- Includes Bull Bar And Mounting Hardware
- Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors
- Made In American And Texas Strong USA
- Schedule 40 Pipe For Center Structure
- 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
- CNC Laser Cut
- Precision Brake Formed
- Welded By Craftsmen Inside And Out
- Direct Bolt On Design
- Recessed Light Ports For Flush Or Surface Mount Led Cubes
- Mounting Holes For License Plate
- Standard Premium 5-Stage Satin Black Powder-Coat Finish
- Made In America And Proudly Built In Texas
- 11-Gauge Steel
- 1/4 in. Internal Bracketry
- Schedule 40 Pipe
- Direct Bolt-On Design
- Recessed Light Ports For Flush Or Surface Mount Led Cubes
- Sensor Compatible
- Textured Satin Black Powder Coat
- Lifetime Structural Warranty
- Superior Strength And Styling
- Give Your Vehicle That Extra Cool Factor
- Two Front Side Openings Allow Light Options
- Sensor Compatible
- 11 Gauge US Steel
- .120 in. Wall Steel Tube Construction
- Laser Cut Skid Plates/Tabs And Plates
- Direct Fit/No Cutting Or Welding Required
- Stainless Steel Hardware
- Designed To Work With Factory Tow Equipment
- Bolt-on design for XRC GEN2 bumpers
- Frame pivot point for added strength
- Tuned one-handed opening operation; tuned to factory tailgate
- CB and jack mounts and Roto Pax® gas can holder
- Manufactured from 3/16 in. cold rolled steel
- Two-stage textured matte black finish
- 18-Current Wrangler JL; 2-4 Door
- Adjustable Slant Tire Carrier
- Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
- Included Adjustable 3rd Brake Light Bracket
- Retains OE Camera Location And Functionality
- Removable Trail Jack And Aerial Antenna Mount
- Steel Vent Cover
- Roller Bearing Pivot
- Fits Up To 40 in. Tire; With Single-Action Open And Close Feature
- Direct Fit
- 2 And 4-Door Models
- Two Stage Matte Black Textured Powder Coat Finish
- Textured Black
- Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
- Incl. Standard Bumper Ends
- Modular Design
- Steel
- Textured Black
- Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
- Incl. Standard Bumper Ends
- Modular Design
- Steel